Security Tower
Site Commander's re-deployable security tower can be ordered with a maximum of 8 external ports. Each port provides gigabit ethernet, 24volt and 12volt power source. It's durable, all-aluminum construction provides all internal components with protection against the elements and other hazards.
The tower is twenty feet in height and provides mounting points for multiple components such as cameras, floodlighting, speakers, motion sensors, wi-fi antennas and other industry standard IP and POE devices. Each port supports a POE device with up to 60 watts of power allowing for winterized PTZ cameras.
At only 110 lbs (50kg), the towers are easily deployed by two workers. With a uniquely designed hinged base, the tower can be raised and lowered without heavy equipment. Making this a truly a re-deployable security tower.
Device mounting ports
Towers can be configured in 4 and 8 port configurations. Each port allows one Gigabit HiPOE connection, one DC power connection configurable to 5, 12, 24, 48 volts. One dry contact connection.
Each port is web-managed, user can reset, enable ports on demand. User can monitor power usage and bandwidth statistics of each port.
Hinged base connection
Tower base plate is uniquely designed to allow for easy setup and take-down using a battery operated hydraulic device with only two persons.
The electronics capsule fits safely into the bottom of the tower, protected from the elements and external tampering.
Server Unit
Site Commander's server is custom, heavy duty and built to last through active construction zones. The unit itself weighs 220 pounds and is immobile once placed as custom handles are retrofitted only in the transport process.
The server boasts a 8 core CPU, 5 2TB harddrives for storage capacity and 16gb of ram. The CPU and other components are fully upgradeable. The server also has two display ports as well as multiple USB options.
Backup Power and Longevity
Switched PDU with SNMP Network interface
Digital Display (Load, Voltage, KW, and IP Address)
Controllable Receptacles - 8 NEMA 5-15R (8 Front)
Single Phase 120V AC - 50/60Hz / 15-amp electrical capacity
NEMA 5-15P Plug with 12-ft. power cord
Automatic events notification via Email and SNMP Trap
User Upgradeable Firmware
1U rack mount
Rugged, industrial-grade metal housing
Three-year warranty
Tower Capsule
Site Commander's re-deployable capsules are the heart of each security tower. The capsules are capable of starting up and running in arctic temperatures as low as -40c and provide web-managed remote reset with power usage monitoring. The capsules also have built in accelerometers to automatically detect movement or tampering when installed in the tower.
Capsules are designed to slide into the base of a tower and mate with a permanently installed connector. The Capsule provides each tower with all the power, Ethernet and dry contact requirements for each device port.
The Capsule provides trunk connectors for input and output to allow daisy-chaining of towers.
Security Bases
Site Commander's re-deployable security bases are designed to allow for easy placement and includes four anchor points for raising and lowering the tower.
Bases are designed with a hollow centre to allow stacking of the bases when not in use.
The bases are constructed of concrete and weigh 760kg, providing the necessary weight to support the tower in load conditions.
Installation of Security Bases
Trunk Cables
Trunk cables are required to connect towers to towers and towers to main base stations and fire controllers. The cables are specially designed to encapsulate power and Gigabit Ethernet in one cable.
Basic systems can run at 120 volt or 240 volt configuration. When using trunk cables, a maximum of 8 towers on one trunk running at 120 volts or 12 towers on one trunk when running at 240 volts. Maximum of 4 trunks per main base station. Maximum length of cable determines separation between towers.
Trunk cables can be ordered in custom lengths up to 300 feet and provide a sealed industrial connector at each end. The cables carry high voltage power and Ethernet in one cable design.
Protective Outer Coating
Our device cables are built with advanced materials that provides protection to -40c for extreme cold weather conditions. Connectors are back-molded to provide a water-tight connection and achieve an IP68 rating.
Thick outer-shell provides protection from continuous drive-over by heavy equipment.